Totim® Racing Foam Seats T3092
The Totim® Racing T3092 kit is recommended for Racing Series Indy Car. This is a kit that contains everything needed to make a customized foam racing seat. Fully sealed, no measuring, no pouring, no mess, no additional covering required and can be fitted in as little as 30 minutes. The seat conforms to FIA homologation specifications.
Procedure isolates a self-expanding polyurethane foam inside a fully sealed cushion.
Available in two sizes accommodating driver’s sizes, vehicles and racing series. ( The better the existing seat fits the driver, the smaller the cushion.)
For best results we recommend using too large of a cushion rather than too small.
Setting time 15 minutes - time to use 1 hour.
Video
The Totim® Racing T3092 kit is recommended for Racing Series Indy Car. This is a kit that contains everything needed to make a customized foam racing seat. Fully sealed, no measuring, no pouring, no mess, no additional covering required and can be fitted in as little as 30 minutes. The seat conforms to FIA homologation specifications.
Procedure isolates a self-expanding polyurethane foam inside a fully sealed cushion.
Available in two sizes accommodating driver’s sizes, vehicles and racing series. ( The better the existing seat fits the driver, the smaller the cushion.)
For best results we recommend using too large of a cushion rather than too small.
Setting time 15 minutes - time to use 1 hour.
Video
The Totim® Racing T3092 kit is recommended for Racing Series Indy Car. This is a kit that contains everything needed to make a customized foam racing seat. Fully sealed, no measuring, no pouring, no mess, no additional covering required and can be fitted in as little as 30 minutes. The seat conforms to FIA homologation specifications.
Procedure isolates a self-expanding polyurethane foam inside a fully sealed cushion.
Available in two sizes accommodating driver’s sizes, vehicles and racing series. ( The better the existing seat fits the driver, the smaller the cushion.)
For best results we recommend using too large of a cushion rather than too small.
Setting time 15 minutes - time to use 1 hour.
Video
-
Can be fitted in as little as 30 minutes with no other tools required
FIA compliant
Impact absorbing foam that offers drivers/racers full body support
Unique polyurethane foam and fully sealed with a black microfiber polyester
Will not shrink and break over time
The energy absorbing foam offers insulation from vibration, reducing driver fatigue - improving driver performance.
The foam seat shapes and molds around the driver.
The seat will form a shape that fulfills driver’s needs, comfort, support with a contained fit.
Choose your size based on the amount of space between the seat and the racing driver. The better the existing seat fits the driver, the smaller the cushion
TOTIM® Racing recommends sizes for series, vehicle and drive size.
For best results we recommend using too large of a cushion rather than too small.
Excess material at the edges can be cut to obtain the necessary shape for the driver.
-
FIA- STANDARD FOR FORMULA ONE AND SPORTS CAR HEADREST MATERIALS 02-11-2010
FIA - FLAME RESISTANCE TEST FOR THE FOAM MATERIALS EN ISO 15025:2003
TEST REPORT N° 391817 ISTITUTO GIORDANO S.p.A.
SEAT COVERING FABRIC FIRE-RESISTANT BAG UNI ISO 3795:1992
-
Each kit consists of pre-packaged, pre-measured 2-part polyurethane that expands when mixed. You never touch the chemicals!
Just break the seal between the two portions and knead the bag until the expanding foam causes the inner pouch to pop (about 50 seconds)
Put the bag in the car and let it expand for another 40-50 seconds
Place the driver in the car on the sealed rectangular bag.
Let the bag expand to fit around the driver - 15 to 20 minutes, depending on kit size
The foam seat shapes and molds around the driver.
The insert is ready for use or trimming after 40 minutes of cure time
-
T3092: 2.3 kg - for large to medium sized drivers.
T3092L: 2.7 kg - for small sized drivers..