Brey-Krause R-9052 Side Mount Brackets for OEM Manual Sliders
The Brey-Krause Side Mount System for Porsche OEM manual 991, 981, 997, and 987 sliders, provides a simple, light, and inexpensive seat mounting solution for your Porsche. This Side Mount System not only installs a wide range of seats, but offers integrated mounting points for Sub Strap, Lap Belts, and Fire Extinguisher Mounts. Due to factory testing requirements for seat belt anchorages, harnesses and seat belts can be mounted above the slider. This means no matter the seating position seat belts, harnesses, and fire extinguisher travel with the seat and remain in proper position in relation to the driver and seat. This provides a significant advantage compared to seat assemblies utilizing aftermarket sliders that are not design to have harnesses mounted above the sliders.
The kit is missing hardware bolts (has one)
Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in satin black
Weight: 1 lbs.
Models: Model R-9052 secures aftermarket seats with a width between 390mm - 430mm for driver's side and/or passenger's side.
Installation: Installs a range of fixed back aftermarket seats to OEM manual sliders seat widths. Seat compatibility is dependent on how side mounts are installed. The Side Mount System installs aftermarket seats in the lowest possible position with OEM sliders. This Side Mount System installs seats about 0.5 inches lower than the stock seat, depending on the type of aftermarket seat used.
Not compatible with OEM sliders with powered fore and aft movement.
Miscellaneous: The R-9052 Side Mounts sold as a set to complete installation of one seat assembly with use of 3-point seat belt, Driver or Passenger side. Clip-In Lap Belt Mounts, Sub Strap Mount, and Fire Extinguisher Mount, for fire extinguisher and up to 6-point harness installation not included.
The Brey-Krause Side Mount System for Porsche OEM manual 991, 981, 997, and 987 sliders, provides a simple, light, and inexpensive seat mounting solution for your Porsche. This Side Mount System not only installs a wide range of seats, but offers integrated mounting points for Sub Strap, Lap Belts, and Fire Extinguisher Mounts. Due to factory testing requirements for seat belt anchorages, harnesses and seat belts can be mounted above the slider. This means no matter the seating position seat belts, harnesses, and fire extinguisher travel with the seat and remain in proper position in relation to the driver and seat. This provides a significant advantage compared to seat assemblies utilizing aftermarket sliders that are not design to have harnesses mounted above the sliders.
The kit is missing hardware bolts (has one)
Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in satin black
Weight: 1 lbs.
Models: Model R-9052 secures aftermarket seats with a width between 390mm - 430mm for driver's side and/or passenger's side.
Installation: Installs a range of fixed back aftermarket seats to OEM manual sliders seat widths. Seat compatibility is dependent on how side mounts are installed. The Side Mount System installs aftermarket seats in the lowest possible position with OEM sliders. This Side Mount System installs seats about 0.5 inches lower than the stock seat, depending on the type of aftermarket seat used.
Not compatible with OEM sliders with powered fore and aft movement.
Miscellaneous: The R-9052 Side Mounts sold as a set to complete installation of one seat assembly with use of 3-point seat belt, Driver or Passenger side. Clip-In Lap Belt Mounts, Sub Strap Mount, and Fire Extinguisher Mount, for fire extinguisher and up to 6-point harness installation not included.
The Brey-Krause Side Mount System for Porsche OEM manual 991, 981, 997, and 987 sliders, provides a simple, light, and inexpensive seat mounting solution for your Porsche. This Side Mount System not only installs a wide range of seats, but offers integrated mounting points for Sub Strap, Lap Belts, and Fire Extinguisher Mounts. Due to factory testing requirements for seat belt anchorages, harnesses and seat belts can be mounted above the slider. This means no matter the seating position seat belts, harnesses, and fire extinguisher travel with the seat and remain in proper position in relation to the driver and seat. This provides a significant advantage compared to seat assemblies utilizing aftermarket sliders that are not design to have harnesses mounted above the sliders.
The kit is missing hardware bolts (has one)
Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in satin black
Weight: 1 lbs.
Models: Model R-9052 secures aftermarket seats with a width between 390mm - 430mm for driver's side and/or passenger's side.
Installation: Installs a range of fixed back aftermarket seats to OEM manual sliders seat widths. Seat compatibility is dependent on how side mounts are installed. The Side Mount System installs aftermarket seats in the lowest possible position with OEM sliders. This Side Mount System installs seats about 0.5 inches lower than the stock seat, depending on the type of aftermarket seat used.
Not compatible with OEM sliders with powered fore and aft movement.
Miscellaneous: The R-9052 Side Mounts sold as a set to complete installation of one seat assembly with use of 3-point seat belt, Driver or Passenger side. Clip-In Lap Belt Mounts, Sub Strap Mount, and Fire Extinguisher Mount, for fire extinguisher and up to 6-point harness installation not included.
For Mounting to Porsche OEM 991, 981, 997, 987 Manual Sliders
Material: 11 gauge, type 304, stainless steel
Finish: Powder-coated in satin black
Weight: 1 lbs.
Models: Model R-9052 secures aftermarket seats with a width between 390mm - 430mm for driver's side and/or passenger's side.
Installation: Installs a range of fixed back aftermarket seats to OEM manual sliders seat widths. Seat compatibility is dependent on how side mounts are installed. The Side Mount System installs aftermarket seats in the lowest possible position with OEM sliders. This Side Mount System installs seats about 0.5 inches lower than the stock seat, depending on the type of aftermarket seat used.
Not compatible with OEM sliders with powered fore and aft movement.
Miscellaneous: The R-9052 Side Mounts sold as a set to complete installation of one seat assembly with use of 3-point seat belt, Driver or Passenger side. Clip-In Lap Belt Mounts, Sub Strap Mount, and Fire Extinguisher Mount, for fire extinguisher and up to 6-point harness installation not included.