Instructor Kit - Bell GT6 Carbon RD-4C/EC, Hybrid S, Speedcom Instructor Kit

Ultra-lightweight Premium Carbon Composite shell

Wide eye-port opening for optimal vision in closed cockpit cars (Shield type SE06)

Bell GT-6 RD-4C/EC - ear cups

Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance

Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems

Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment

Optional Top and Side air intakes available for use with external cooling system

Optional side-cover (L or R) for smooth integration of radio connectors and hydration system

Optional Ear-Muffs for increased noise insulation

ZeroNoise® noise cancelling microphone integrated in face piece

Coil style (curly cable) with heavy duty In-Molded Male Nexus Connector (4 pins)

RCA connector compatible with Earplug Transducers (Various types of ZeroNoise® Transducers available as accessory)

Hydration system (drinking tube)

Side cover (Right or Left) integrating RCA connection and hydration connection

Interior: Dark Grey High Strength – High Comfort FR Fabric

Color: Carbon, Gloss finish

Sizes: 54-55-56-57-58-59-60-61-61+

Homologation: FIA8859-2015 & SNELL SA2020

Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order). Contact us for custom interior options, availability and pricing. Will significantly increase shipping dates.

FIA approved

High quality carbon fiber construction

Low profile. No high back to hook on the bars on exit

Multiple load paths to dissipate head loads

Buckle attachment in front. No bulky straps underneath

6 sizes: Chest size - Xsmall (32"-36"); small (36"-40"); medium (40-44"); large (44"-48"); Xlarge (48"-52")

To measure: measure around the chest below the pectoral muscles. Measure over your normal track day apparel or your race suit. Do not add any slack to the measurement, or take a tight measurement.

To achieve optimum protection the Hybrid S needs a close fit. Consequently, please make sure your measurements fits correctly in one of the listed five sizes.

Note, Each device size only gives an extra 4 inches to the chest belt for fit adjustment.

Price includes HANS post anchor kit

Sliding M6 Anchor System +$65.00

Price includes the mandatory FIA hologram ($8.00)

We advise that women order a custom Hybrid S. Other sizes can be ordered - please contact us directly for all custom orders.

* (from Simpson) The Hybrid S Head Restraint is FIA approved and is tested and shown to be compatible with 3-point harnesses used by Car Club enthusiasts and High Performance Driving Experiences. This allows Driving Instructors, Auto Manufacturing Test Engineers, and other cars with 3-point harnesses to have added protection. We are pleased to offer protection to this sector of the market, however, Simpson’s top concern is your safety. While on a racetrack for the BEST protection we suggest a Full-Containment Cockpit System that includes a, Full Containment Seat, Snell rated Helmet, FIA or SFI approved Head Restraint, and 7 point seat belt harness system.

**IMPORTANT: The FIA HYBRID S is The ONLY Head and Neck Restraint System tested and approved by Simpson for use with 3-point belts. Other Simpson devices that share the "Hybrid" name have not been tested and will not protect you when using the standard with 3-point belts.

Independent volume controls for driver and co-driver

4 AA battery operation for portable application

12 V harness for permanent application

Integrated roll bar mounting brackets for ease of installation

Audio output to record audio in real time on your video device. (Video device must be equipped with an external audio input and an additional cable may be needed.)

Extra loud volume with superb sound quality

ON/OFF indicator LED

Built in intercom to helmet leads with IMSA style standard wiring configuration.

Choose from box; box plus 1 headset; box plus 2 headsets.

Extra loud, high-quality sound features independent driver/co-driver volume controls for easy control of noise levels.

Built-in intercom leads with IMSA-style connectors can be attached directly to a radio-equipped helmet, or use the Speedcom Single-Ear Headset (sold separately).

Nose cancelling microphone

Flexible microphone boom for ease of installation

Ultra loud speaker to ensure that you can hear every word

Heavy Duty cord with IMSA style connection

The SC-SCIH can also be used to plug directly into any IMSA style radio car wiring harness. It was developed to work in conjunction with the Speedcom 2MPI intercom and any IMSA style radio wiring harness. 

Perfect for all racers and track day enthusiasts.

Padded to protect your helmet Over-sized to carry both helmet and neck restraint device

Unique divider system

External pockets for accessories including gloves.

Measures 20.5 inches x 13.5 x 13 inches and weighs 2.85lbs

SpeedCom: CSCC-2MPI

CSCC-SEIH

Bell Racing helmet: 1239101, 1239102, 1239103, 1239104, 1239105, 1239106, 1239107, 1239108, 1239109, 1239121, 1239122, 1239123, 1239124, 1239125, 1239126, 1239127, 1239128, 1239129

Bell bag: 2120014

Simpson: HYS11, HYS11M6