Zero 2020 FIA 3.0 liter Fire Marshal Mechanical Fire Suppression System
Lighter, Smaller, Better, Faster - The new Zero 2020 Series has replaced and upgraded Lifeline’s Zero 2000 series. The FIA 3 liter Fire Marshal Mechanical Fire Suppression System provides substantial coverage with performance from a revised lighter and smaller bottle. The system utilizes a water based ABF foam that delivers the fastest heat absorption and knock down capability on the market. The system includes 5 nozzles, placing 3 of Lifeline’s misting nozzles in the engine bay and 2 in the cockpit for increased driver protection.
FIRE SUPPRESSION - WHAT TO KNOW
Lifeline's range of FIA specification systems have been homologated by the FIA for use in International motorsport. The FIA certification requires that the systems be tested to the FIA standard for plumbed in fire systems.
The kit includes:-
- 1x 8mm – Alloy Semi Rigid Tube – 6m Length
- 1x Heat Proof Over-braid – 6m
- 1x 2.0mtr/6ft Pull Cable – Red T Handle
- 1x 4.0mtr/12ft Pull Cable – Red T Handle
- 1x Zero 2020 Brackets & Straps
- 1x 8mm Bulkhead Fitting
- 5x Misting Nozzle
- 4x 8mm Equal T Connector
-
AFFF foam suppressant
FIA Tech List 16 approved (older spec than 8865-2015)
Smaller and lighter design than the previous Zero 2000 systems with increased levels of safety compared to competitors.
The fastest heat absorption and fire knock down capability available from a water based system.
5 nozzle system for strategic coverage of the engine bay and cockpit reducing weight and complexity of the installation.
FIA Technical List 16 compliant
Steel cylinder dimensions - 6.1in OD (155mm) x 13.5in Length Overall (342mm) at 11.5lbs (5.2kg).
Covers a wide range of vehicles including Sports/GT cars, Formula/Prototype cars, and Rally cars.
Entry-level, cost-effective complete fire system
Mechanical
-
1x 8mm – Alloy Semi Rigid Tube – 6m Length
1x Heat Proof Overbraid – 6m
1x 2.0mtr/6ft Pull Cable – Red T Handle
1x 4.0mtr/12ft Pull Cable – Red T Handle
1x Zero 2020 Brackets & Straps
1x 8mm Bulkhead Fitting
5x Misting Nozzle
4x 8mm Equal T Connector
1x Installation Instructions
-
106-001-011